Lines Matching +full:hardware +full:- +full:wise
45 --------------------------------------
58 -----------------------------------------------
72 This goes against the current documentation for pilot-xfer and other
73 packages, but is the only way that it will work due to the hardware
77 (this is usually /dev/ttyUSB1 if you do not have any other usb-serial
99 Kroah-Hartman at greg@kroah.com
103 -------------------
115 significant advantage of using USB is speed - I can get 73 to 113
120 contains the necessary packages and a simple step-by-step howto.
129 iPAQ - disable autosync by going to the Start/Settings/Connections menu
138 You can also try soft-resetting your PDA before attempting a connection.
155 --------------------------
157 Single port DB-9 serial adapter, pushed as a PDA adapter for iMacs (mostly
165 - basic input/output (tested with 'cu')
166 - blocking write when serial line can't keep up
167 - changing baud rates (up to 115200)
168 - getting/setting modem control pins (TIOCM{GET,SET,BIS,BIC})
169 - sending break (although duration looks suspect)
172 - device strings (as logged by kernel) have trailing binary garbage
173 - device ID isn't right, might collide with other Keyspan products
174 - changing baud rates ought to flush tx/rx to avoid mangled half characters
177 - parity, 7 vs 8 bits per char, 1 or 2 stop bits
178 - HW flow control
179 - not all of the standard USB descriptors are handled:
186 Keyspan USA-series Serial Adapters
187 ----------------------------------
189 Single, Dual and Quad port adapters - driver uses Keyspan supplied
194 The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and
195 have been pretty thoroughly tested at various baud rates with 8-N-1
199 The USA-28 isn't yet supported though doing so should be pretty
212 ------------------------------
214 This is a single port DB-25 serial adapter.
218 - TripNav TN-200 USB GPS
219 - Navis Engineering Bureau CH-4711 USB GPS
225 -------------------------------
232 --------------------------------------
245 - DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
246 - Cypress HID->COM RS232 adapter
250 hid->com device.
275 The hid->com adapter can run at a maximum baud of 115200bps. Please note
289 (your problems/patches can alternately be submitted to usb-devel)
293 ----------------------
299 This driver works under SMP with the usb-uhci driver. It does not
315 --------------------------------
317 Single port DB-9/PS-2 serial adapter from Belkin with firmware by eTEK Labs.
325 - Baud rate 300-230400
326 - Data bits 5-8
327 - Stop bits 1-2
328 - Parity N,E,O,M,S
329 - Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR) [1]_
330 - Break Set and clear
331 - Line control Input/Output query and control [2]_
334 Hardware input flow control is only enabled for firmware
336 firmware errata. Hardware output flow control is working for all
343 automatic hardware flow control.
346 - Add true modem control line query capability. Currently tracks the
348 - Add error reporting back to application for UART error conditions.
349 - Add support for flush ioctls.
350 - Add everything else that is missing :)
356 Empeg empeg-car Mark I/II Driver
357 --------------------------------
360 client synchronization tools for an Empeg empeg-car mp3 player.
365 * emptool --usb /dev/ttyUSB0 (or whatever you named your device node)
372 ---------------------------------------
374 This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
375 U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
376 Model No. U232-P9). More information about this device can be found at
377 the manufacturer's web-site: http://www.mct.com.tw.
384 the same Vendor ID but different Product IDs. Sitecom's U232-P25 serial
386 driver. Also, D-Link's DU-H3SP USB BAY also works with this driver.
393 -----------------------------------
398 - Edgeport/4
399 - Rapidport/4
400 - Edgeport/4t
401 - Edgeport/2
402 - Edgeport/4i
403 - Edgeport/2i
404 - Edgeport/421
405 - Edgeport/21
406 - Edgeport/8
407 - Edgeport/8 Dual
408 - Edgeport/2D8
409 - Edgeport/4D8
410 - Edgeport/8i
411 - Edgeport/2 DIN
412 - Edgeport/4 DIN
413 - Edgeport/16 Dual
416 Kroah-Hartman at greg@kroah.com
419 REINER SCT cyberJack pinpad/e-com USB chipcard reader
420 -----------------------------------------------------
427 There is also a user part for a CT-API driver available. A site
429 maintainer (linux-usb@sii.li).
432 linux-usb@sii.li
436 ----------------------
441 from Aten (the UC-232) and IO-Data work with this driver, as does
442 the DCU-11 mobile-phone cable.
445 Kroah-Hartman at greg@kroah.com
448 KL5KUSB105 chipset / PalmConnect USB single-port adapter
449 --------------------------------------------------------
458 and pilot-manager -daemon calls will work. Baud rates up to 115200
459 are supported, but handshaking (software or hardware) is not, which is
460 why it is wise to cut down on the rate used is wise for large
463 See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
467 ------------------------
469 This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip
477 frank@kingswood-consulting.co.uk.
480 -------------------------------
486 will not appear unless parallel port support is first enabled at the top-level
491 - Implement ECP/EPP modes for the parallel port.
492 - Baud rates higher than 115200 are currently broken.
493 - Devices with a single serial port based on the Moschip MCS7703 may work
498 ---------------------
509 echo <vid> <pid> >/sys/bus/usb-serial/drivers/generic/new_id
523 Kroah-Hartman at greg@kroah.com
531 above, or join the Linux-USB mailing list (information on joining the
533 http://www.linux-usb.org/ )
536 Greg Kroah-Hartman