Lines Matching +full:motherboard +full:- +full:bus
5 27-Dec-2002
8 USB 2.0-capable host controller hardware. The USB 2.0 standard is
11 - "High Speed" 480 Mbit/sec (60 MByte/sec)
12 - "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
13 - "Low Speed" 1.5 Mbit/sec
31 While usb-storage devices have been available since mid-2001 (working
34 appear to be on hold until more systems come with USB 2.0 built-in.
39 other changes to the Linux-USB core APIs, including the hub driver,
43 - David Brownell
56 --------------
72 ---------------
96 Assuming you have an EHCI controller (on a PCI card or motherboard)
99 # modprobe ehci-hcd
103 # rmmod ehci-hcd
106 "ohci-hcd" or "uhci-hcd". In case of any trouble with the EHCI driver,
127 usb-storage doing disk I/O; watch the request queues!)
138 but they may want to check for "usb_device->speed == USB_SPEED_HIGH".
171 --------------------
180 onto one bus does not get you 60 MByte/sec. The issue appears to be
187 more silicon real estate at the problem so that new motherboard chip
194 default ehci-hcd driver uses the minimum latency, which means that if
199 --------------------
201 To get even 20 MByte/sec transfer rates, Linux-USB device drivers will