Lines Matching full:khz

48 * sample rate from 8kHz to 96kHz
57  * 16-bit/48kHz ==> 4 channels in + 4 channels out
61  * 24-bit/48kHz ==> 4 channels in + 2 channels out, 
66  * 24-bit/96kHz ==> 2 channels in _or_ 2 channels out (half duplex only)
197    - 16bits 48kHz mode with Di disabled
204    - 16bits 48kHz mode with Di enabled
234    - 24bits 48kHz mode with Di disabled
241    - 24bits 48kHz mode with Di enabled
249    - 24bits 96kHz mode
266    - 16bits 48kHz mode with only the Do port enabled 
350    - When set to ``1`` the rate range is 48.1-96kHz
351    - Otherwise the sample rate range is 8-48kHz
357    - Note that b2 implies b3 as the 96kHz mode is only supported for 24 bits 
377    - for instance choosing 0x05 (16bits 96kHz) will fail back to 0x09 since 
382    - choosing b2 will prepare all interfaces for 24bits/96kHz but you'll
431   - 24-bit depth, 48.1-96kHz sample mode
436   - 24-bit depth, 8-48kHz sample mode
441   - 24-bit depth, 8-48kHz sample mode
446   - 16-bit depth, 8-48kHz sample mode
451   - 16-bit depth, 8-48kHz sample mode
456   - 16-bit depth, 8-48kHz sample mode
464  * if 96KHz only AltSets nb.1 of each interface must be selected
465  * if samples are using 24bits/48KHz then AltSet 2 must me used if
468  * if samples are using 16bits/48KHz then AltSet 4 must me used if