Lines Matching refs:switchdev

11 :ref:`Documentation/networking/switchdev.rst <switchdev>`.
44 This document uses the term "switchdev function" to refer to the PCIe function
48 Depending on NIC design, a multi-port NIC might have a single switchdev function
50 switchdev function, for each physical network port.
51 If the NIC supports nested switching, there might be separate switchdev
52 functions for each nested switch, in which case each switchdev function should
99  - VFs belonging to the switchdev function.
147 The driver instance attached to the switchdev function should, for each virtual
149 in-kernel reference to the switchdev function's own netdevice or driver private
155 through the switchdev function.  For example, ``ndo_start_xmit()`` might send
156 the packet through a hardware TX queue attached to the switchdev function, with
165 representee or of the switchdev function.
177 instance if the switchdev function is ``eth4`` then a representor with a
211 instead be the switchdev function's own uplink netdevice.
219 require an IP address to be bound to the underlay device (e.g. switchdev