Lines Matching full:shall

177                transaction. For TX data chunks, this bit shall be ’1’.
191 RSVD (Bit 28..24) - Reserved: All reserved bits shall be ‘0’.
195                   shall set them to ‘0’.
203 SV (Bit 20) - Start Valid flag. The SPI host shall set this bit when the
205               transmit data chunk payload. Otherwise, this bit shall be
209 SWO (Bit 19..16) - Start Word Offset. When SV = 1, this field shall
212                    Ethernet frame to be transmitted. The host shall write
215 RSVD (Bit 15) - Reserved: All reserved bits shall be ‘0’.
217 EV (Bit 14) - End Valid flag. The SPI host shall set this bit when the end
219               chunk payload. Otherwise, this bit shall be zero.
221 EBO (Bit 13..8) - End Byte Offset. When EV = 1, this field shall contain
224                   transmit. This field shall be zero when EV = 0.
233 RSVD (Bit 5..1) - Reserved: All reserved bits shall be ‘0’.
292                   If not implemented, the MAC-PHY shall set these bits to
298               SPI host shall ignore the chunk payload.
317               of a received Ethernet frame (EV = 1) and shall be zero at
331                received Ethernet frame. The MAC-PHY shall set this bit to
337                MAC-PHY shall set this bit to zero when RTSA = 0.
388                transaction. For control commands, this bit shall be ‘0’.
417                  length of zero shall read or write a single register.
436 Writing to any unimplemented or undefined registers shall be ignored and
448 MAC-PHY. Reading any unimplemented or undefined registers shall return