Lines Matching +full:01 +full:a
27 - The ice hardware uses hierarchical scheduling for Tx with a fixed
29 points. Root node represents a port, while all the leaves represent
39 One example would be sending traffic to queues that are not a multiple
41 the 9th queue has a different parent than the rest, and it's given
42 more bandwidth credits. This causes a problem when the system is
55 To address this need, you can switch to a 5-layer topology, which
59 is a lower configuration depth of the tree.
63 use a value of 5. For example:
66 Use a value of 9 to set it back to the default value.
141 kernel only displayed a 2-digit version number (major.minor).
151 incremented whenever a major breaking change occurs, or when the
155 a fix is delivered as a patch against an older base Option ROM.
170 variation of the DDP package has a unique name.
204 ``devlink-flash`` interface. It supports updating the device flash using a
234 The ``ice`` driver supports activating new firmware after a flash update
240 $ devlink dev reload pci/0000:01:00.0 reload action fw_activate
242 The new firmware is activated by issuing a device specific Embedded
253 a predefined set of available port split options for the whole device.
255 A system reboot is required for port split to be applied.
282 ``devlink port unsplit`` will select the option with a split count of 1. If
308 Both the ``nvm-flash`` and ``shadow-ram`` regions can be accessed without a
309 snapshot. The ``device-caps`` region requires a snapshot as the contents are
312 Users can request an immediate capture of a snapshot for all three regions
318 pci/0000:01:00.0/nvm-flash: size 10485760 snapshot [] max 1
319 pci/0000:01:00.0/device-caps: size 4096 snapshot [] max 10
321 $ devlink region new pci/0000:01:00.0/nvm-flash snapshot 1
322 $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1
324 $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1
330 $ devlink region read pci/0000:01:00.0/nvm-flash snapshot 1 address 0 length 16
333 $ devlink region delete pci/0000:01:00.0/nvm-flash snapshot 1
335 $ devlink region new pci/0000:01:00.0/device-caps snapshot 1
336 $ devlink region dump pci/0000:01:00.0/device-caps snapshot 1
337 0000000000000000 01 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00
339 0000000000000020 02 00 02 01 32 03 00 00 0a 00 00 00 25 00 00 00
341 0000000000000040 04 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
343 0000000000000060 05 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00
345 0000000000000080 06 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
347 00000000000000a0 08 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
349 00000000000000c0 12 00 01 00 01 00 00 00 01 00 01 00 00 00 00 00
351 00000000000000e0 13 00 01 00 00 01 00 00 00 00 00 00 00 00 00 00
353 0000000000000100 14 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
355 0000000000000120 15 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
357 0000000000000140 16 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
359 0000000000000160 17 00 01 00 06 00 00 00 00 00 00 00 00 00 00 00
361 0000000000000180 18 00 01 00 01 00 00 00 01 00 00 00 08 00 00 00
363 00000000000001a0 22 00 01 00 01 00 00 00 00 00 00 00 00 00 00 00
365 00000000000001c0 40 00 01 00 00 08 00 00 08 00 00 00 00 00 00 00
367 00000000000001e0 41 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00
369 0000000000000200 42 00 01 00 00 08 00 00 00 00 00 00 00 00 00 00
372 $ devlink region delete pci/0000:01:00.0/device-caps snapshot 1
379 Functions in a tree structure and assign supported parameters: tx_share,
380 tx_max, tx_priority and tx_weight to each node in a tree. So effectively
388 devlink-rate API. To configure those features a driver reload is necessary.
410 an absolute number specifying a maximum amount of bytes a Node may
412 that a link will not oversaturate the receiver on the remote end
416 - minimum bandwidth allocated to a tree node when it is not blocked.
434 nodes with the same priority form a WFQ subgroup in the sibling group