Lines Matching full:doc
5 doc: DPLL subsystem.
11 doc: |
18 doc: input can be only selected by sending a request to dpll
22 doc: highest prio input pin auto selected by dpll
27 doc: |
33 doc: |
39 doc: |
43 doc: |
47 doc: |
57 doc: |
64 doc: |
69 doc: |
75 doc: |
82 doc: |
91 doc: |
122 doc: |
132 doc: type of dpll, valid values for DPLL_A_TYPE attribute
136 doc: dpll produces Pulse-Per-Second signal
140 doc: dpll drives the Ethernet Equipment Clock
145 doc: |
151 doc: aggregates another layer of selectable pins
155 doc: external input
158 doc: ethernet port PHY's recovered clock
161 doc: device internal oscillator
164 doc: GNSS recovered clock
169 doc: |
175 doc: pin used as a input of a signal
179 doc: pin used to output the signal
200 doc: |
206 doc: pin connected, active input of phase locked loop
210 doc: pin disconnected, not considered as a valid input
213 doc: pin enabled for automatic input selection
218 doc: |
224 doc: pin direction can be changed
227 doc: pin priority can be changed
230 doc: pin state can be changed
235 doc: |
290 doc: |
382 doc: |
392 doc: |
400 doc: |
406 doc: |
445 doc: |
464 doc: |
492 doc: Set attributes for a DPLL device
504 doc: Notification about device appearing
509 doc: Notification about device disappearing
514 doc: Notification about device configuration being changed
519 doc: |
541 doc: |
586 doc: Set attributes of a target pin
606 doc: Notification about pin appearing
611 doc: Notification about pin disappearing
616 doc: Notification about pin configuration being changed