Lines Matching full:identifier

80 identifier will define a mapping between appropriate CIPSO field values
114 3.3    Domain of Interpretation Identifier
117 not appear as the DOI identifier in any CIPSO option.  Implementations
118 should assume that the DOI identifier field is not aligned on any particular
138 number 1 to represent that same security level.  The DOI identifier is used
147 a tag type identifier followed by the length of the tag and ends with the
150 identifier field in the CIPSO header, implementations should assume that
160 types, implementations will require the DOI identifier as well as the tag
489 PORT_DOI - This parameter is used to assign a DOI identifier value to a
491 going out this port MUST use the specified DOI identifier.  All CIPSO
495 NET_DOI - This parameter is used to assign a DOI identifier value to a
497 for the particular IP network MUST use the specified DOI identifier.  All
501 HOST_DOI - This parameter is used to assign a DOI identifier value to a
503 the particular IP host will use the specified DOI identifier.  All CIPSO
576 If any field within the CIPSO option, such as the DOI identifier, is not
652 The DOI identifier to be used for all outgoing datagrams is configured by
664 the administrator.  If port level DOI identifier assignment is used, then
665 the PORT_DOI configuration parameter MUST contain the DOI identifier to
667 MUST contain the DOI identifier to use.  And if host level DOI assignment
668 is employed, then the HOST_DOI parameter MUST contain the DOI identifier
702 6.    Assignment of DOI Identifier Numbers                                   =
704 Requests for assignment of a DOI identifier number should be addressed to