Lines Matching +full:on +full:- +full:axis
3 .. _joystick-doc:
9 and similar devices. It is based on a larger project aiming to support all
14 linux-input@vger.kernel.org
16 send "subscribe linux-input" to majordomo@vger.kernel.org to subscribe to it.
25 ---------
29 usually packaged as ``joystick``, ``input-utils``, ``evtest``, and so on.
35 ------------
48 ln -s input/js0 js0
49 ln -s input/js1 js1
50 ln -s input/js2 js2
51 ln -s input/js3 js3
61 --------------
76 inputattach -xxx /dev/tts/X &
83 For automatic module loading, something like this might work - tailor to
86 alias tty-ldisc-2 serport
87 alias char-major-13 input
92 -----------------------
103 the stick. They should have the full range from -32767 to 32767. If all this
111 -----------
118 jscal -c /dev/input/js0
127 jscal -p /dev/input/js0 > /etc/joystick.cal
134 can also add the ``jscal -p`` line to your shutdown script.
136 Hardware-specific driver information
142 ----------------
146 routine for this, allowing for data precision that can't be found on any
156 * 2-axis, 4-button joystick
157 * 3-axis, 4-button joystick
158 * 4-axis, 4-button joystick
162 you'll need to specify the types either on the kernel command line or on the
169 present on gameports in the system, starting with gameport0, second 'type'
170 entry defining joystick on gameport1 and so on.
175 none No analog joystick on that port
177 2btn 2-button n-axis joystick
178 y-joy Two 2-button 2-axis joysticks on an Y-cable
179 y-pad Two 2-button 2-axis gamepads on an Y-cable
183 gamepad 4/6-button n-axis gamepad
184 gamepad8 8-button 2-axis gamepad
195 0 Axis X1
196 1 Axis Y1
197 2 Axis X2
198 3 Axis Y2
211 16 Saitek F1-F4 Buttons
214 20 Joy2 Axis X1
215 21 Joy2 Axis Y1
216 22 Joy2 Axis X2
217 23 Joy2 Axis Y2
226 ------------------------------
242 although the joystick has only 8. The 9th button is the mode switch on the
245 joystick will also re-center itself, taking the position it was in during
252 --------------------
269 combination of) devices on a single gameport, using a Y-cable or chained
277 I-Force driver described below. Logitech CyberMan is not supported yet.
280 -----------
291 of up to two of these pads either chained together or using a Y-cable on a
299 ----------------------------
317 --------------------------------
335 a Y-cable.
338 ---------------------
345 Up to two of these can be used on a single gameport, using a Y-cable.
348 ------------------------
353 * Genius Flight2000 F-23 joystick
354 * Genius Flight2000 F-31 joystick
355 * Genius G-09D gamepad
361 --------------------------
373 --------------------------
377 joysticks. Digitally communicating joystick will work only on port 0, while
378 using Y-cables, you can connect up to 8 analog joysticks to a single L4
382 ------------------------------
390 -------------------
397 ------------------
402 emu10k1-gp.c module for it instead of the normal ns558.c one.
404 SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes
405 ------------------------------------------------------------------------
413 -----
427 1 1-button digital joystick
433 Game console and 8-bit pads and joysticks
434 -----------------------------------------
437 Linux runs on, and usually require a special connector for attaching
440 See :ref:`joystick-parport` for more info.
443 -----------------------
460 inputattach --spaceorb /dev/tts/x &
464 inputattach --spaceball /dev/tts/x &
469 There is one caveat with the SpaceOrb. The button #6, the one on the bottom
478 ----------------------
489 inputattach --warrior /dev/tts/x &
494 ----------------------
498 joy-magellan module. It currently supports only the:
503 models; the additional buttons on the 'Plus' versions are not supported yet.
507 inputattach --magellan /dev/tts/x &
512 I-Force devices
513 ---------------
515 All I-Force devices are supported by the iforce module. This includes:
529 inputattach --iforce /dev/tts/x &
531 command. After that the I-Force device will be detected, and the
537 The I-Force driver now supports force feedback via the event interface.
544 ----------------------
550 inputattach --stinger /dev/tty/x &
559 some of its modes. The most useful modes are "normal" - for the 1.x
562 jstest --normal /dev/input/js0
563 jstest --old /dev/input/js0
579 or pad that uses a 9-pin D-type Cannon connector to the serial port of my