Lines Matching +full:inverted +full:- +full:tx
2 Walkera WK-0701 transmitter
5 Walkera WK-0701 transmitter is supplied with a ready to fly Walkera
10 http://zub.fei.tuke.sk/walkera-wk0701/
13 cg-clone http://zub.fei.tuke.sk/GIT/walkera0701-joystick
19 At back side of transmitter S-video connector can be found. Modulation
24 Cable: (walkera TX to parport)
26 Walkera WK-0701 TX S-VIDEO connector::
28 (back side of TX)
29 __ __ S-video: canon25
35 ------- 3 __________________________________|________________ 25 GND
45 walkera0701 module, check dmesg for error messages. Connect TX to PC by
46 cable and run jstest /dev/input/js0 to see values from TX. If no value can
47 be changed by TX "joystick", check output from /proc/interrupts. Value for
48 (usually irq7) parport must increase if TX is on.
59 Based on walkera WK-0701 PCM Format description by Shaul Eizikovich.
60 (downloaded from http://www.smartpropoplus.com/Docs/Walkera_Wk-0701_PCM.pdf)
63 -------------
69 +---------+ +------+
71 --+ +------+ +---
74 -----
81 ------------
98 (Warning, pulses on ACK are inverted by transistor, irq is raised up on sync
102 ---------------------------
113 directly controlled from TX). Binary representations are the same as in first
120 Walkera_Wk-0701_PCM.pdf.
123 --------------------