Lines Matching +full:three +full:- +full:state
4 Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
25 5.2.1 Parity checking and packet re-synchronization
26 5.2.2 One/Three finger touch
31 6.2.1 One/Three finger touch
92 Currently the Linux Elantech touchpad driver provides three extra knobs under
114 non-zero value will turn it ON. For hardware version 1 the default is ON.
132 Depending on the state of crc_enabled, certain basic data integrity
135 The state of crc_enabled can be altered with this knob.
138 "0" or "1" to this file will set the state to "0" or "1".
145 4 bytes version: (after the arrow is the name given in the Dell-provided driver)
173 ---------
179 echo -n 0x16 > reg_10
236 -----------------------------------------
282 firmware 1.x seem to map one, two and three finger taps
298 -----------------------------------------
332 th = 1 when three finger touch
360 ---------
366 echo -n 0x56 > reg_10
393 -----------------------------------------
395 Parity checking and packet re-synchronization
425 One/Three finger touch
486 two fingers, but only the pair of the lower-left and upper-right coordinates.
503 ax8..ax0 = lower-left finger absolute x value
510 ay8..ay0 = lower-left finger absolute y value
522 bx8..bx0 = upper-right finger absolute x value
529 by8..by0 = upper-right finger absolute y value
535 ---------
548 -----------------------------------------
550 1 and 3 finger touch shares the same 6-byte packet format, except that
551 3 finger touch only reports the position of the center of all three fingers.
570 One/Three finger touch
626 ---------
636 -----------------------------------------
749 w = 1 when delta overflows (> 127 or < -128), in this case
795 ---------
800 -----------------------------------------