Lines Matching +full:thermal +full:- +full:diode
10 Addresses scanned: I2C 0x2c - 0x2f
15 - Yuan Mu (Winbond Electronics)
16 - Rudolf Marek <r.marek@assembler.cz>
20 -----------------
36 -----------
44 sets of 6-pin CPU VID input.
48 voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6,
49 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution,
50 temp5-6 have a 1 degree Celsiis resolution.
53 Temp1-4 have 2 possible types. It can be read from (and written to)
54 temp[1-4]_type.
56 - If the value is 3, it starts monitoring using a remote termal diode
58 - If the value is 6, it starts monitoring using the temperature sensor
61 Temp5-6 can be connected to external thermistors (value of
62 temp[5-6]_type is 4).
76 to manual mode, you need to check the value of temp[1-6]_fan_map, make
82 mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3
88 In Thermal Cruise mode, the chip attempts to keep the temperature at a
91 if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease
97 While not fundamentally different from the Thermal Cruise mode, the
98 implementation is quite different, giving you a finer-grained control.
110 -----
112 Only Fan1-5 and PWM1-3 are guaranteed to always exist, other fan inputs and