Lines Matching +full:in4 +full:- +full:in5
10 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
12 Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
18 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
28 Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
34 Addresses scanned: I2C 0x28 - 0x2f
42 - Frodo Looijaard <frodol@dds.nl>,
43 - Philip Edelbrock <phil@netroedge.com>,
44 - Mark Studebaker <mdsxyz123@yahoo.com>
47 -----------------
67 -----------
75 The Asus chips are similar to an I2C-only W83782D.
77 +----------+---------+--------+-------+-------+---------+--------+------+-----+
79 +----------+---------+--------+-------+-------+---------+--------+------+-----+
81 +----------+---------+--------+-------+-------+---------+--------+------+-----+
83 +----------+---------+--------+-------+-------+---------+--------+------+-----+
84 | w83781d | 7 | 3 | 0 | 3 | 0x10-1 | 0x5ca3 | yes | yes |
85 +----------+---------+--------+-------+-------+---------+--------+------+-----+
86 | w83782d | 9 | 3 | 2-4 | 3 | 0x30 | 0x5ca3 | yes | yes |
87 +----------+---------+--------+-------+-------+---------+--------+------+-----+
88 | w83783s | 5-6 | 3 | 2 | 1-2 | 0x40 | 0x5ca3 | yes | no |
89 +----------+---------+--------+-------+-------+---------+--------+------+-----+
94 well-behaved state first.
115 Temperatures are guaranteed within a range of -55 to +125 degrees. The
140 several kinds of temperature probes. You can program the so-called
163 0x000100 in4
164 0x000200 in5
178 miss once-only alarms.
184 -----------------
193 The driver now takes care of this so that user-space applications
197 - Problems with diode/thermistor settings (supported?)
198 - One user reports fans stopping under high server load.
199 - Revision 2 seems to have 2 PWM registers but we don't know
212 -----
213 783s has no in1 so that in[2-6] are compatible with the 781d/782d.
215 783s pin is programmable for -5V or temp1; defaults to -5V,
226 782d has pwm1-2 for ISA, pwm1-4 for i2c. (pwm3-4 share pins with
230 ------------------
231 - PWM clock registers:
240 ---------------------------------
246 > reprogramming the R-T table if the Beta of the thermistor is not
247 > 3435K. The R-T table is described briefly in section 8.20.
248 > What formulas do I use to program a new R-T table for a given Beta?
251 We are sorry that the calculation for R-T table value is
253 to calculate the R-T table for you. But you should give us real R-T
255 them and obtain 32-byte data, and you can fill the 32-byte data to the
282 -----------
287 also gives advice for another Asus chipset, the Mozart-2 (which we
296 - I2C address range: 0x29 - 0x2F
297 - If register 0x58 holds 0x31 then we have an Asus (either ASB100 or AS99127F)
298 - Which one depends on register 0x4F (manufacturer ID):
300 - 0x06 or 0x94: ASB100
301 - 0x12 or 0xC3: AS99127F rev.1
302 - 0x5C or 0xA3: AS99127F rev.2
310 Mozart-2:
311 - I2C address: 0x77
312 - If register 0x58 holds 0x56 or 0x10 then we have a Mozart-2
313 - Of the Mozart there are 3 types:
315 - 0x58=0x56, 0x4E=0x94, 0x4F=0x36: Asus ASM58 Mozart-2
316 - 0x58=0x56, 0x4E=0x94, 0x4F=0x06: Asus AS2K129R Mozart-2
317 - 0x58=0x10, 0x4E=0x5C, 0x4F=0xA3: Asus ??? Mozart-2
325 - sensor 1: register 0x27
326 - sensor 2 & 3 are the 2 LM75's on the SMBus
327 - sensor 4: register 0x17
336 - sensor 1: register 0x27
337 - sensor 2 & 3 are the 2 LM75's on the SMBus
344 Mozart-2:
345 - sensor 1: register 0x27
346 - sensor 2: register 0x13
352 - 3 fans, identical to the W83781D
354 Mozart-2:
355 - 2 fans only, 1350000/RPM/div
356 - fan 1: register 0x28, divisor on register 0xA1 (bits 4-5)
357 - fan 2: register 0x29, divisor on register 0xA1 (bits 6-7)
370 - in0=r(0x20)*0.016
371 - in1=r(0x21)*0.016
372 - in2=r(0x22)*0.016
373 - in3=r(0x23)*0.016*1.68
374 - in4=r(0x24)*0.016*3.8
375 - in5=r(0x25)*(-0.016)*3.97
376 - in6=r(0x26)*(-0.016)*1.666
379 - in0=r(0x20)*0.016
380 - in1=r(0x21)*0.016
381 - in2=r(0x22)*0.016
382 - in3=r(0x23)*0.016*1.68
383 - in4=r(0x24)*0.016*3.8
384 - in5=r(0x25)*(-0.016)*3.97
385 - in6=r(0x26)*(-0.016)*1.503
388 - in0=r(0x20)*0.016
389 - in1=r(0x21)*0.016
390 - in2=r(0x22)*0.016
391 - in3=r(0x23)*0.016*1.68
392 - in4=r(0x24)*0.016*3.8
393 - in5=(r(0x25)*0.016-3.6)*5.14+3.6
394 - in6=(r(0x26)*0.016-3.6)*3.14+3.6
396 Mozart-2:
397 - in0=r(0x20)*0.016
398 - in1=255
399 - in2=r(0x22)*0.016
400 - in3=r(0x23)*0.016*1.68
401 - in4=r(0x24)*0.016*4
402 - in5=255
403 - in6=255
410 chips as well) by Jean Delvare as of 2004-04-09:
420 Looks like bits 1-0 are for temp1, bits 3-2 for temp2 and bits 5-4 for
427 When bit 7 is clear, bits 6-0 seem to hold a threshold value. If the value
435 When bit 7 is set, bits 3-0 seem to hold a threshold value, while bits 6-4
458 - seems to turn fans off after some time(1-2 minutes)... might be
459 some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an
460 old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan
463 - off
465 - slightly "on-ner" than off, but my fans do not get to move. I can
466 hear the high-pitched PWM sound that motors give off at too-low-pwm.
468 - now they do move. Estimate about 70% speed or so.
469 0x84-0x8f
470 - full on
476 My mobo is an ASUS A7V266-E. This behavior is similar to what I got
477 with speedfan under Windows, where 0-15% would be off, 15-2x% (can't
480 * Additional info about PWM on the AS99127F rev.1 from lm-sensors
483 I conducted some experiment on Asus P3B-F motherboard with AS99127F
491 P3B-F actually output variable DC voltage on fan header center pin,