Lines Matching +full:all +full:- +full:inputs +full:- +full:2
11 Addresses scanned: -
15 - http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
16 - http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
17 - http://focus.ti.com/lit/ds/symlink/ucd90160.pdf
18 - http://focus.ti.com/lit/ds/symlink/ucd90320.pdf
19 - http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
20 - http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
22 Author: Guenter Roeck <linux@roeck-us.net>
26 -----------
31 sequences up to 12 independent voltage rails. The device integrates a 12-bit
33 current, or temperature inputs.
35 The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and
36 system-health monitor. The device integrates a 12-bit ADC for monitoring up to
37 13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins
38 can be used for power supply enables, power-on reset signals, external
41 margining, and general-purpose PWM functions.
43 The UCD90160 is a 16-rail PMBus/I2C addressable power-supply sequencer and
44 monitor. The device integrates a 12-bit ADC for monitoring up to 16 power-supply
45 voltage inputs. Twenty-six GPIO pins can be used for power supply enables,
46 power-on reset signals, external interrupts, cascading, or other system
48 UCD90160 offers support for margining, and general-purpose PWM functions.
50 The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and
56 The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
57 monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
58 voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
59 power-on reset signals, external interrupts, cascading, or other system
61 UCD9090 offers support for margining, and general-purpose PWM functions.
63 The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and
64 system-health monitor. The device integrates a 12-bit ADC for monitoring up to
65 13 power-supply voltage, current, or temperature inputs.
72 -----------
74 This driver does not auto-detect devices. You will have to instantiate the
75 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
80 ---------------------
87 -------------
89 The following attributes are supported. Limits are read-write; all other
90 attributes are read-only.
93 in[1-12]_label "vout[1-12]".
94 in[1-12]_input Measured voltage. From READ_VOUT register.
95 in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
96 in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
97 in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
98 in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
100 in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
101 in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
102 in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
104 in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
107 curr[1-12]_label "iout[1-12]".
108 curr[1-12]_input Measured current. From READ_IOUT register.
109 curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
110 curr[1-12]_lcrit Critical minimum output current. From
112 curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
114 curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
115 curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
121 temp[1-2]_input Measured temperatures. From READ_TEMPERATURE_1 and
123 temp[1-2]_max Maximum temperature. From OT_WARN_LIMIT register.
124 temp[1-2]_crit Critical high temperature. From OT_FAULT_LIMIT register.
125 temp[1-2]_max_alarm Temperature high alarm.
126 temp[1-2]_crit_alarm Temperature critical high alarm.
128 fan[1-4]_input Fan RPM.
129 fan[1-4]_alarm Fan alarm.
130 fan[1-4]_fault Fan fault.