Lines Matching +full:ns +full:- +full:config
6 * SMSC LPC47B397-NC
8 * SMSC SCH5307-NS
14 Addresses scanned: none, address read from Super I/O config space
20 - Mark M. Hoffman <mhoffman@lightlink.com>
21 - Utilitek Systems, Inc.
25 The following specification describes the SMSC LPC47B397-NC [1]_ sensor chip
27 provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
30 .. [1] And SMSC SCH5307-NS and SCH5317, which have different device IDs but are
33 -------------------------------------------------------------------------
36 -------------------------------------------------------------------------
87 --------------------------------------
100 RPM = 60 / (2203 * 11.11111 E-6) = 2451 RPM
105 ----------------------
115 To place the chip into the Configuration State The config key (0x55) is written
116 to the CONFIG PORT (0x2E).
121 In configuration mode, the INDEX PORT is located at the CONFIG PORT address and
131 logical device to the INDEX PORT and then write or read the config-
140 To exit the Configuration State the write 0xAA to the CONFIG PORT (0x2E).
167 The Device ID will read 0x6F (0x81 for SCH5307-NS, and 0x85 for SCH5317)
171 ------------------------------
184 OUT DX,AL ;Point to LD# Config Reg