Lines Matching +full:high +full:- +full:z
12 Addresses scanned: -
23 Addresses scanned: -
27 https://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF
29 https://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
31 https://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
37 Addresses scanned: -
55 Addresses scanned: -
73 Addresses scanned: -
83 Addresses scanned: -
88 Author: Guenter Roeck <linux@roeck-us.net>
92 -----------
98 Each monitored channel has its own high and low limits, plus a critical
105 -----------
116 $ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
120 ---------------------
182 -------------
190 The following attributes are supported. Limits are read-write; all other
191 attributes are read-only.
204 inX_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
207 inX_crit_alarm Voltage critical high alarm.
222 currX_alarm Current high alarm.
224 currX_max_alarm Current high alarm.
228 currX_crit_alarm Current critical high alarm.
230 currX_label "iin", "iinY", "iinY.Z", "ioutY", or "ioutY.Z",
231 where Y reflects the page number and Z reflects the
242 powerX_alarm Power high alarm.
244 powerX_crit_alarm Output power critical high alarm.
246 powerX_label "pin", "pinY", "pinY.Z", "poutY", or "poutY.Z",
247 where Y reflects the page number and Z reflects the
258 tempX_crit Critical high temperature.
263 tempX_max_alarm Chip temperature high alarm. Set by comparing
269 tempX_crit_alarm Chip temperature critical high alarm. Set by comparing