Lines Matching +full:connected +full:- +full:positive
17 - Aurelien Jarno <aurelien@aurel32.net>
18 - valuable contributions by Jan M. Sendler <sendler@sendler.de>,
19 - Jean Delvare <jdelvare@suse.de>
23 -----------
25 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
29 The PCF8591 has 4 analog inputs programmable as single-ended or
32 - mode 0 : four single ended inputs
35 - mode 1 : three differential inputs
37 Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
39 - mode 2 : single ended and differential mixed
41 Pins AIN2 is the positive differential input for channel 3
44 - mode 3 : two differential inputs
45 Pins AIN0 is the positive differential input for channel 0
47 Pins AIN2 is the positive differential input for channel 1
53 -----------------
59 - 0 = four single ended inputs
60 - 1 = three differential inputs
61 - 2 = single ended and differential mixed
62 - 3 = two differential inputs
66 -------------------------------------
71 using the sysfs interface. See Documentation/i2c/instantiating-devices.rst
76 /sys/bus/i2c/devices/<0>-<1>/
77 where <0> is the bus the chip is connected to (e. g. i2c-0)
89 from 0 to 255 for single ended inputs and -128 to +127 for differential inputs
90 (8-bit ADC).
95 The out0_output file is RW. Writing a number between 0 and 255 (8-bit DAC), send
96 the value to the digital-to-analog converter. Note that a voltage will