Lines Matching +full:ascii +full:- +full:based

1 Kernel driver occ-hwmon
12 -----------
14 This driver supports hardware monitoring for the On-Chip Controller (OCC)
20 manually if an "ibm,p8-occ-hwmon" compatible device is found under the
21 appropriate I2C bus node in the device-tree.
23 The P9 version of this driver is a client driver of the FSI-based OCC driver.
24 It will be probed automatically by the FSI-based OCC driver.
27 -------------
29 The following attributes are supported. All attributes are read-only unless
35 to the device driver, which must therefore export the sensor ID as-is.
41 temp[1-n]_label
46     temp[1-n]_input
52     temp[1-n]_type
56     temp[1-n]_fault
63 	temp[1-n]_alarm
69 	temp[1-n]_input
73 freq[1-n]_label
75 freq[1-n]_input
77 power[1-n]_input
80 power[1-n]_average
82 power[1-n]_average_interval
88     power[1-n]_label
93     power[1-n]_label
101     power[1-n]_label
111     power[1-n]_label
113     power[1-n]_input
115     power[1-n]_cap
117     power[1-n]_cap_not_redundant
120     power[1-n]_cap_max
123     power[1-n]_cap_min		Minimum power cap that the OCC can enforce in
125     power[1-n]_cap_user		The power cap set by the user, in microwatts.
127 				cap has been set. This attribute is read-write,
135 	power[1-n]_cap_user_source
145 extn[1-n]_label
146 			ASCII ID or OCC sensor ID.
147 extn[1-n]_flags
150 			ASCII ID. Other bits are reserved.
151 extn[1-n]_input