Lines Matching +full:system +full:- +full:on +full:- +full:chip

11     Addresses scanned: -
15 	http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf
21     Addresses scanned: -
25 	http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf
31     Addresses scanned: -
35 	http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf
41     Addresses scanned: -
45 	http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
47 Author: Guenter Roeck <linux@roeck-us.net>
51 -----------
53 [From datasheets] The MAX16065/MAX16066 flash-configurable system managers
54 monitor and sequence multiple system voltages. The MAX16065/MAX16066 can also
55 accurately monitor (+/-2.5%) one current channel using a dedicated high-side
56 current-sense amplifier. The MAX16065 manages up to twelve system voltages
59 The MAX16067 flash-configurable system manager monitors and sequences multiple
60 system voltages. The MAX16067 manages up to six system voltages simultaneously.
62 The MAX16068 flash-configurable system manager monitors and manages up to six
63 system voltages simultaneously.
65 The MAX16070/MAX16071 flash-configurable system monitors supervise multiple
66 system voltages. The MAX16070/MAX16071 can also accurately monitor (+/-2.5%)
67 one current channel using a dedicated high-side current-sense amplifier. The
68 MAX16070 monitors up to twelve system voltages simultaneously, and the MAX16071
78 -----------
81 can be safely used to identify the chip. You will have to instantiate
82 the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
85 WARNING: Do not access chip registers using the i2cdump command, and do not use
86 any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
94 -------------
97 in[0-11]_input		Input voltage measurements.
99 in12_input		Voltage on CSP (Current Sense Positive) pin.
100 			Only if the chip supports current sensing and if
103 in[0-11]_min		Low warning limit.
104 			Supported on MAX16065, MAX16066, MAX16070, and MAX16071
107 in[0-11]_max		High warning limit.
108 			Supported on MAX16065, MAX16066, MAX16070, and MAX16071
112 			(depending on chip configuration), but not both.
114 in[0-11]_lcrit		Low critical limit.
116 in[0-11]_crit		High critical limit.
118 in[0-11]_alarm		Input voltage alarm.
120 curr1_input		Current sense input; only if the chip supports current
125 curr1_alarm		Overcurrent alarm; only if the chip supports current