Lines Matching +full:low +full:- +full:power +full:- +full:disable

1 .. SPDX-License-Identifier: GPL-2.0-only
12     Addresses scanned: - I2C 0x40 - 0x5A (7-bit)
13     Addresses scanned: - I2C 0x80 - 0xB4 with a step of 2 (8-bit)
17         https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
25 from a live backplane. Using one or more external N-channel pass transistors,
28 power, energy and fault status. The device features analog foldback current
30 drive allows high power applications to either share safe operating area across
31 parallel MOSFETs or support a 2-stage start-up that first charges the load
32 capacitance followed by enabling a low on-resistance path to the load. The
33 LTC4282 is well suited to high power applications because the precise monitoring
35 and power supplies must safely operate. Non-volatile configuration allows for
41 The following attributes are supported. Limits are read-write and all the other
42 attributes are read-only. Note that in0 and in1 are mutually exclusive. Enabling
55 in0_enable		Enable/Disable VSOURCE monitoring
70 in1_enable		Enable/Disable VDD monitoring
95 power1_input		Power (in uW)
96 power1_min		Low power threshold
97 power1_max		High power threshold
98 power1_input_lowest	Historical minimum power use
99 power1_input_highest	Historical maximum power use
101 			Also clears power bad fault logs.
102 power1_min_alarm	Low power alarm
103 power1_max_alarm	High power alarm
104 power1_label		Channel label (Power)
107 energy1_enable		Enable/Disable Energy accumulation
123 ``/sys/kernel/debug/ltc4282-hwmon[X]/``
128 in0_fet_short_fault_log	 Set to 1 when the ADC detects a FET-short fault.
129 in0_fet_bad_fault_log    Set to 1 when a FET-BAD fault occurs.