Lines Matching +full:high +full:- +full:threshold
1 .. SPDX-License-Identifier: GPL-2.0-only
12 Addresses scanned: - I2C 0x40 - 0x5A (7-bit)
13 Addresses scanned: - I2C 0x80 - 0xB4 with a step of 2 (8-bit)
17 https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
25 from a live backplane. Using one or more external N-channel pass transistors,
30 drive allows high power applications to either share safe operating area across
31 parallel MOSFETs or support a 2-stage start-up that first charges the load
32 capacitance followed by enabling a low on-resistance path to the load. The
33 LTC4282 is well suited to high power applications because the precise monitoring
35 and power supplies must safely operate. Non-volatile configuration allows for
41 The following attributes are supported. Limits are read-write and all the other
42 attributes are read-only. Note that in0 and in1 are mutually exclusive. Enabling
47 in0_min Undervoltage threshold
48 in0_max Overvoltage threshold
60 in1_min Undervoltage threshold
61 in1_max Overvoltage threshold
74 in2_min Undervoltage threshold
75 in2_max Overvoltage threshold
84 curr1_min Undercurrent threshold
85 curr1_max Overcurrent threshold
96 power1_min Low power threshold
97 power1_max High power threshold
103 power1_max_alarm High power alarm
123 ``/sys/kernel/debug/ltc4282-hwmon[X]/``
128 in0_fet_short_fault_log Set to 1 when the ADC detects a FET-short fault.
129 in0_fet_bad_fault_log Set to 1 when a FET-BAD fault occurs.