Lines Matching +full:high +full:- +full:current
10 Addresses scanned: -
18 Addresses scanned: -
26 Addresses scanned: -
34 Addresses scanned: -
42 Addresses scanned: -
52 Addresses scanned: -
60 Addresses scanned: -
68 Addresses scanned: -
76 Addresses scanned: -
84 Addresses scanned: -
92 Addresses scanned: -
100 Addresses scanned: -
108 Addresses scanned: -
116 Addresses scanned: -
124 Addresses scanned: -
132 Addresses scanned: -
140 Addresses scanned: -
148 Addresses scanned: -
156 Addresses scanned: -
164 Addresses scanned: -
172 Addresses scanned: -
180 Addresses scanned: -
188 Addresses scanned: -
196 Addresses scanned: -
202 Author: Guenter Roeck <linux@roeck-us.net>
206 -----------
208 - LTC2974 and LTC2975 are quad digital power supply managers.
209 - LTC2978 is an octal power supply monitor.
210 - LTC2977 is a pin compatible replacement for LTC2978.
211 - LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
212 - in a single die. The chip is instantiated and reported as two separate chips
213 - on two different I2C bus addresses.
214 - LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
215 - DC/DC controllers.
216 - LTC3883 is a single phase step-down DC/DC controller.
217 - LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
218 - additional components on a single die. The chip is instantiated and reported
219 - as two separate chips on two different I2C bus addresses.
220 - LTM4675 is a dual 9A or single 18A μModule regulator
221 - LTM4676 is a dual 13A or single 26A uModule regulator.
222 - LTM4686 is a dual 10A or single 20A uModule regulator.
226 -----------
235 # echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
239 ----------------
262 in1_max_alarm Input voltage high alarm.
272 in1_crit_alarm Input voltage critical high alarm.
283 in[N]_label "vout[1-8]".
285 - LTC2972: N=2-3
286 - LTC2974, LTC2975: N=2-5
287 - LTC2977, LTC2979, LTC2980, LTM2987: N=2-9
288 - LTC2978: N=2-9
289 - LTC3880, LTC3882, LTC3884, LTC23886 LTC3887, LTC3889,
291 LTM4680, LTM4700: N=2-3
292 - LTC3883: N=2
306 in[N]_max_alarm Output voltage high alarm.
310 in[N]_crit_alarm Output voltage critical high alarm.
322 - On LTC2972, temp[1-2] report external temperatures,
324 - On LTC2974 and LTC2975, temp[1-4] report external
326 - On LTC2977, LTC2979, LTC2980, LTC2978, and LTM2987,
329 - On LTC3880, LTC3882, LTC3886, LTC3887, LTC3889,
333 - On LTC3883, temp1 reports an external temperature,
345 temp[N]_crit Critical high temperature.
352 temp[N]_max_alarm Temperature high alarm.
357 temp[N]_crit_alarm Temperature critical high alarm.
361 - LTC2972, LTC2974, LTC2975, LTC2977, LTM2980, LTC2978,
363 - Not supported for chip temperature sensor on LTC2974
380 power[N]_label "pout[1-4]".
382 - LTC2972: N=1-2
383 - LTC2974, LTC2975: N=1-4
384 - LTC2977, LTC2979, LTC2980, LTM2987: Not supported
385 - LTC2978: Not supported
386 - LTC3880, LTC3882, LTC3884, LTC3886, LTC3887, LTC3889,
388 LTM4700: N=1-2
389 - LTC3883: N=2
399 curr1_input Measured input current.
401 curr1_max Maximum input current.
403 curr1_max_alarm Input current high alarm.
405 curr1_highest Highest input current.
409 curr1_reset_history Reset input current history.
413 curr[N]_label "iout[1-4]".
415 - LTC2972: N-1-2
416 - LTC2974, LTC2975: N=1-4
417 - LTC2977, LTC2979, LTC2980, LTM2987: not supported
418 - LTC2978: not supported
419 - LTC3880, LTC3882, LTC3884, LTC3886, LTC3887, LTC3889,
421 LTM4700: N=2-3
422 - LTC3883: N=2
424 curr[N]_input Measured output current.
426 curr[N]_max Maximum output current.
428 curr[N]_crit Critical high output current.
430 curr[N]_lcrit Critical low output current.
434 curr[N]_max_alarm Output current high alarm.
436 curr[N]_crit_alarm Output current critical high alarm.
438 curr[N]_lcrit_alarm Output current critical low alarm.
442 curr[N]_lowest Lowest output current.
446 curr[N]_highest Highest output current.
448 curr[N]_reset_history Reset output current history.