Lines Matching full:sysfs

83 sysfs files prochot1, prochot2, prochot1_avg, prochot2_avg, prochot1_max,
93 These intervals can be found in the sysfs files prochot1_interval and
105 non-zero integer to the sysfs file prochot_short.
112 The sysfs files prochot1_override and prochot2_override contain boolean
114 #P2_PROCHOT, respectively.  The sysfs file prochot_override_duty_cycle
123 sysfs files vrdhot1 and vrdhot2. There is one value per file: a boolean for
136 fan tachometer with a pwm) to the sysfs file fan<n>_smart_tach.  A zero
145 15.10.6 of the datasheet for details.)  The sysfs files pwm1_override
147 where 0 disables and 1 enables the manual control mode.  The sysfs files pwm1
159 The sysfs files pwm1_freq and pwm2_freq are used to select the frequency. The
177 in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
194 sysfs files temp<n>_auto_base.  The offsets are expressed in cumulative
226 the sysfs files temp<n>_auto_offset_hyst.  The value in this file has the
230 will use the minimum PWM value.  These values are found in the sysfs files
240 values are found in the sysfs files pwm<n>_auto_spinup_min. The value in this
243 the sysfs files pwm<n>_auto_spinup_time. The value in this file is
269 This limit is expressed in degrees C in the sysfs files temp<n>_auto_boost.
273 C in the sysfs files temp<n>_auto_boost_hyst.
280 All eight GPIOs are read by reading the bitmask in the sysfs file gpio.  The
284 LM93 Unique sysfs Files