Lines Matching +full:thermal +full:- +full:diode

174     - Christophe Gauthron
175     - Jean Delvare <jdelvare@suse.de>
179 -----------------
192     misconfigured by BIOS - PWM values would be inverted. This option tries
209   Provided since there are reports that system-wide acpi_enfore_resources=lax
217 -------------------
219 All the chips supported by this driver are LPC Super-I/O chips, accessed
220 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
228 -----------
247 is stored in the Super-I/O configuration space. Due to technical limitations,
258 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
260 not compatible with the older chips and revisions. The 16-bit tachometer mode
271 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
275 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
277 The IT8790E, IT8792E/IT8795E and IT87952E support up to 3 fans. 16-bit fan
280 The IT8732F supports a closed-loop mode for fan control, but this is not
288 16-bit tachometer counters aren't used, fan readings can be divided by
310 The driver handles this transparently so user-space doesn't have to care.
321 once-only alarms.
323 Out-of-limit readings can also result in beeping, if the chip is properly
331 or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
334 3 = thermal diode)
338 -----------------
349 read-only.
353 -------------------------------------------
379 -----------------------------
381 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
382 temperature for thermal diodes or diode-connected thermal transistors.
384 are ignored. If the thermal sensor type is Intel PECI, the temperature offset