Lines Matching +full:hardware +full:- +full:triggered
174 - Christophe Gauthron
175 - Jean Delvare <jdelvare@suse.de>
179 -----------------
192 misconfigured by BIOS - PWM values would be inverted. This option tries
209 Provided since there are reports that system-wide acpi_enfore_resources=lax
216 Hardware Interfaces
217 -------------------
219 All the chips supported by this driver are LPC Super-I/O chips, accessed
220 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
221 SMBus interface to the hardware monitoring functions. This driver no
228 -----------
236 joysticks and other miscellaneous stuff. For hardware monitoring, they
247 is stored in the Super-I/O configuration space. Due to technical limitations,
258 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
260 not compatible with the older chips and revisions. The 16-bit tachometer mode
263 The IT8726F is just bit enhanced IT8716F with additional hardware
270 The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
271 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
274 The IT8620E and IT8628E are custom designs, hardware monitoring part is similar
275 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
277 The IT8790E, IT8792E/IT8795E and IT87952E support up to 3 fans. 16-bit fan
280 The IT8732F supports a closed-loop mode for fan control, but this is not
283 Temperatures are measured in degrees Celsius. An alarm is triggered once
287 triggered if the rotation speed has dropped below a programmable limit. When
288 16-bit tachometer counters aren't used, fan readings can be divided by
295 alarm is triggered if the voltage has crossed a programmable minimum or
310 The driver handles this transparently so user-space doesn't have to care.
316 If an alarm triggers, it will remain triggered until the hardware register
318 have disappeared! Note that in the current implementation, all hardware
321 once-only alarms.
323 Out-of-limit readings can also result in beeping, if the chip is properly
338 -----------------
349 read-only.
353 -------------------------------------------
379 -----------------------------
381 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
382 temperature for thermal diodes or diode-connected thermal transistors.