Lines Matching +full:all +full:- +full:inputs
174 - Christophe Gauthron
175 - Jean Delvare <jdelvare@suse.de>
179 -----------------
192 misconfigured by BIOS - PWM values would be inverted. This option tries
201 all chips, to only set the first chip use "force_id=0x8689,0".
209 Provided since there are reports that system-wide acpi_enfore_resources=lax
217 -------------------
219 All the chips supported by this driver are LPC Super-I/O chips, accessed
220 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
228 -----------
241 The IT8712F and IT8716F additionally feature VID inputs, used to report
246 The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
247 is stored in the Super-I/O configuration space. Due to technical limitations,
250 upper VID bits share their pins with voltage inputs (in5 and in6) so you
258 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
260 not compatible with the older chips and revisions. The 16-bit tachometer mode
271 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
275 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
277 The IT8790E, IT8792E/IT8795E and IT87952E support up to 3 fans. 16-bit fan
280 The IT8732F supports a closed-loop mode for fan control, but this is not
288 16-bit tachometer counters aren't used, fan readings can be divided by
291 2600 RPM. Not all RPM values can accurately be represented, so some rounding
297 zero'; this is important for negative voltage measurements. On most chips, all
298 voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution
305 and IT8783E/F, some voltage inputs are internal and scaled inside the chip:
310 The driver handles this transparently so user-space doesn't have to care.
318 have disappeared! Note that in the current implementation, all hardware
321 once-only alarms.
323 Out-of-limit readings can also result in beeping, if the chip is properly
338 -----------------
348 used to drive all fan outputs, which is why pwm2_freq and pwm3_freq are
349 read-only.
353 -------------------------------------------
362 freely chosen. The temperature of all 4 trip points can be freely chosen.
379 -----------------------------
381 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
382 temperature for thermal diodes or diode-connected thermal transistors.