Lines Matching +full:high +full:- +full:power

10     Addresses: I2C 0x40 - 0x4f
20     Addresses: I2C 0x40 - 0x4f
30     Addresses: I2C 0x40 - 0x4f
40     Addresses: I2C 0x40 - 0x4f
50     Addresses: I2C 0x40 - 0x4f
60     Addresses: I2C 0x40 - 0x4f
70     Addresses: I2C 0x40 - 0x4f
80 -----------
82 The INA219 is a high-side current shunt and power monitor with an I2C
86 The INA220 is a high or low side current shunt and power monitor with an I2C
89 The INA226 is a current shunt and power monitor with an I2C interface.
92 INA230 and INA231 are high or low side current shunt and power monitors
96 INA260 is a high or low side current and power monitor with integrated shunt
99 The SY24655 is a high- and low-side current shunt and power monitor with an I2C
102 calculate average power for use in energy conversion.
104 The shunt value in micro-ohms can be set via platform data or device tree at
105 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
110 Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
117 ---------------------
123 power1_input		Power(uW) measurement channel
128 ------------------------------------------------------------------------
132 curr1_crit		Critical high current
134 curr1_crit_alarm	Current critical high alarm
136 in0_crit		Critical high shunt voltage
138 in0_crit_alarm		Shunt voltage critical high alarm
140 in1_crit		Critical high bus voltage
142 in1_crit_alarm		Bus voltage critical high alarm
143 power1_crit		Critical high power
144 power1_crit_alarm	Power critical high alarm
150 ------------------------------
153 power1_average		average power from last reading to the present.
158    - Configure `shunt_resistor` before configure `power1_crit`, because power
160    - Because of the underlying register implementation, only one `*crit` setting