Lines Matching +full:conversion +full:- +full:interval
10 Addresses: I2C 0x40 - 0x4f
20 Addresses: I2C 0x40 - 0x4f
30 Addresses: I2C 0x40 - 0x4f
40 Addresses: I2C 0x40 - 0x4f
50 Addresses: I2C 0x40 - 0x4f
60 Addresses: I2C 0x40 - 0x4f
70 Addresses: I2C 0x40 - 0x4f
80 -----------
82 The INA219 is a high-side current shunt and power monitor with an I2C
84 programmable conversion times and filtering.
99 The SY24655 is a high- and low-side current shunt and power monitor with an I2C
101 programmable calibration value and conversion times. The SY24655 can also
102 calculate average power for use in energy conversion.
104 The shunt value in micro-ohms can be set via platform data or device tree at
105 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
110 Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
111 bus and shunt voltage conversion times multiplied by the averaging rate. We
112 don't touch the conversion times and only modify the number of averages. The
114 The actual programmed interval may vary from the desired value.
117 ---------------------
128 ------------------------------------------------------------------------
145 update_interval data conversion time; affects number of samples used
150 ------------------------------
158 - Configure `shunt_resistor` before configure `power1_crit`, because power
160 - Because of the underlying register implementation, only one `*crit` setting