Lines Matching +full:gmt_eds +full:- +full:762 +full:_763 +full:- +full:080710 +full:- +full:0
5 and performs closed-loop or open-loop control of the fan speed. Two
6 modes - PWM or DC - are supported by the device.
9 http://natisbad.org/NAS/ref/GMT_EDS-762_763-080710-0.2.pdf. sysfs
10 bindings are described in Documentation/hwmon/sysfs-interface.rst.
25 set desired fan speed. This only makes sense in closed-loop
44 in closed-loop control mode, if fan RPM value is 25% out
50 speed control (open-loop) via pwm1 described below, 2 for
51 automatic fan speed control (closed-loop) via fan1_target
55 set or get fan driving mode: 1 for PWM mode, 0 for DC mode.
58 get or set PWM fan control value in open-loop mode. This is an
59 integer value between 0 and 255. 0 stops the fan, 255 makes
62 Both in PWM mode ('pwm1_mode' set to 1) and DC mode ('pwm1_mode' set to 0),
63 when current fan speed control mode is open-loop ('pwm1_enable' set to 1),
64 the fan speed is programmed by setting a value between 0 and 255 via 'pwm1'
65 entry (0 stops the fan, 255 makes it run at full speed). In closed-loop mode
67 the chip via 'fan1_target'. In closed-loop mode, the target speed is compared