Lines Matching +full:temperature +full:- +full:mode
44 -----------
48 source), 3 fans and 3 temperature sensors.
57 The Fintek F71806F/FG Super-I/O chip is essentially the same as the
65 ------------------
67 Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
84 in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
89 in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
90 in7 VIN7 VCORE 10K - 1.00 ~1.40 V [1]_
111 --------------
113 Fan rotation speeds are reported as 12-bit values from a gated clock
119 The chip assumes 2 pulse-per-revolution fans.
125 Temperature Monitoring
126 ----------------------
128 Temperatures are reported in degrees Celsius. Each temperature measured
130 hysteresis value, below which the temperature has to drop before the
133 All temperature channels are external, there is no embedded temperature
135 or a thermistor. The driver reports the currently selected mode, but
141 -----------
143 Both PWM (pulse-width modulation) and DC fan speed control methods are
152 control, but may generate annoying high-pitch noise. So a frequency just
162 Three different fan control modes are supported; the mode number is written
165 * 1: Manual mode
169 * 2: Temperature mode
170 You define 3 temperature/fan speed trip points using the
172 relationship between temperature and fan speed with two additional points
173 interpolated between the values that you define. When the temperature
176 * 3: Fan speed mode
180 fan2 and pwm3 to fan3. Temperature mode also requires that temp1 corresponds