Lines Matching +full:527 +full:- +full:humidity +full:- +full:sensors
1 .. SPDX-License-Identifier: GPL-2.0-or-later
12 Addresses scanned: -
14 …Datasheet: https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
18 - Javier Carrasco <javier.carrasco.cruz@gmail.com>
21 -----------
23 This driver implements support for the Amphenol ChipCap 2, a humidity and
25 relative humidity is expressed as a per cent mille. The measurement ranges
28 - Relative humidity: 0 to 100000 pcm (14-bit resolution)
29 - Temperature: -40000 to +125000 m°C (14-bit resolution)
34 Depending on the hardware configuration, up to two humidity alarms to control
39 might be truncated to match the 14-bit device resolution (6.1 pcm/LSB)
42 ------------
46 sysfs-Interface
47 ---------------
56 humidity1_input: RO humidity input
65 humidity1_min: RW humidity low limit. Measurements under
66 this limit trigger a humidity low alarm
67 humidity1_max: RW humidity high limit. Measurements above
68 this limit trigger a humidity high alarm
69 humidity1_min_hyst: RW humidity low hystersis
70 humidity1_max_hyst: RW humidity high hystersis
71 humidity1_min_alarm: RO humidity low alarm indicator
72 humidity1_max_alarm: RO humidity high alarm indicator