Lines Matching +full:input +full:- +full:value

1 Kernel driver bel-pfe
10     Addresses scanned: -
12 … Datasheet: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-pfe1100-12-054xa.pdf
18     Addresses scanned: -
20     Datasheet: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-pfe3000-series.pdf
26 -----------
33     1100 Watt AC to DC power-factor-corrected (PFC) power supply.
38     3000 Watt AC/DC power-factor-corrected (PFC) and DC-DC power supply.
46 -----------
48 This driver does not auto-detect devices. You will have to instantiate the
49 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
55 	$ modprobe bel-pfe
56 	$ echo pfe3000 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
60 ---------------------
66 -------------
70 curr1_input		Measured input current
71 curr1_max               Input current max value
72 curr1_max_alarm         Input current max alarm
74 curr[2-3]_label		"iout[1-2]"
75 curr[2-3]_input		Measured output current
76 curr[2-3]_max           Output current max value
77 curr[2-3]_max_alarm     Output current max alarm
79 fan[1-2]_input          Fan 1 and 2 speed in RPM
83 in1_input		Measured input voltage
84 in1_crit		Input voltage critical max value
85 in1_crit_alarm		Input voltage critical max alarm
86 in1_lcrit               Input voltage critical min value
87 in1_lcrit_alarm         Input voltage critical min alarm
88 in1_max                 Input voltage max value
89 in1_max_alarm           Input voltage max alarm
94 in[3-8]_label		"vout[1-3,5-7]"
95 in[3-8]_input		Measured output voltage
96 in[3-4]_alarm           vout[1-2] output voltage alarm
98 power[1-2]_label	"pin[1-2]"
99 power[1-2]_input        Measured input power
100 power[1-2]_alarm	Input power high alarm
102 power[3-4]_label	"pout[1-2]"
103 power[3-4]_input	Measured output power
105 temp[1-3]_input		Measured temperature
106 temp[1-3]_alarm         Temperature alarm
111     - curr3, fan2, vout[2-7], vcap, pin2, pout2 and temp3 attributes only