Lines Matching +full:fan +full:-

1 .. SPDX-License-Identifier: GPL-2.0-or-later
3 Kernel driver aquacomputer-d5next
8 * Aquacomputer Aquaero 5/6 fan controllers
12 * Aquacomputer Octo fan controller
13 * Aquacomputer Quadro fan controller
18 * Aquacomputer Poweradjust 3 fan controller
25 -----------
32 speed (in RPM), power, voltage and current. Temperature offsets and fan speeds
35 For the D5 Next pump, available sensors are pump and fan speed, power, voltage
37 available through debugfs are the serial number, firmware version and power-on
38 count. Attaching a fan to it is optional and allows it to be controlled using
39 temperature curves directly from the pump. If it's not connected, the fan-related
65 filled with coolant. Pump RPM and flow can be set to enhance on-device calculations,
69 and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump
73 with speed, power, voltage and current of both the pump and optionally connected fan.
87 -----------
93 -------------
96 temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
97 temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
98 fan[1-9]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
99 fan1_min         Minimal fan speed (in RPM)
100 fan1_max         Maximal fan speed (in RPM)
101 fan1_target      Target fan speed (in RPM)
104 power[1-8]_input Pump/fan power (in micro Watts)
105 in[0-7]_input    Pump/fan voltage (in milli Volts)
106 curr[1-8]_input  Pump/fan current (in milli Amperes)
107 pwm[1-8]         Fan PWM (0 - 255)
111 ---------------