Lines Matching +full:current +full:- +full:speed

1 .. SPDX-License-Identifier: GPL-2.0-or-later
3 Kernel driver aquacomputer-d5next
25 -----------
32 speed (in RPM), power, voltage and current. Temperature offsets and fan speeds
35 For the D5 Next pump, available sensors are pump and fan speed, power, voltage
36 and current, as well as coolant temperature and eight virtual temp sensors. Also
37 available through debugfs are the serial number, firmware version and power-on
39 temperature curves directly from the pump. If it's not connected, the fan-related
49 as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage
50 and current. Flow sensor pulses are also available.
53 sensor and four PWM controllable fans, along with their speed (in RPM), power,
54 voltage and current. Flow sensor pulses are also available.
63 The Leakshield exposes two temperature sensors and coolant pressure (current, min, max and
65 filled with coolant. Pump RPM and flow can be set to enhance on-device calculations,
70 current.
73 with speed, power, voltage and current of both the pump and optionally connected fan.
74 It also exposes pressure and flow speed readings.
87 -----------
93 -------------
96 temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
97 temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
98 fan[1-9]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
99 fan1_min         Minimal fan speed (in RPM)
100 fan1_max         Maximal fan speed (in RPM)
101 fan1_target      Target fan speed (in RPM)
104 power[1-8]_input Pump/fan power (in micro Watts)
105 in[0-7]_input    Pump/fan voltage (in milli Volts)
106 curr[1-8]_input  Pump/fan current (in milli Amperes)
107 pwm[1-8]         Fan PWM (0 - 255)
111 ---------------