Lines Matching +full:temperature +full:- +full:mode

14 	       https://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
23 	       https://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf
33 	       https://www.analog.com/static/imported-files/data_sheets/ADT7310.pdf
43 	       https://www.analog.com/static/imported-files/data_sheets/ADT7320.pdf
48 -----------
50 The ADT7310/ADT7410 is a temperature sensor with rated temperature range of
51 -55°C to +150°C. It has a high accuracy of +/-0.5°C and can be operated at a
53 INT pin to indicate that a minimum or maximum temperature set point has been
54 exceeded, as well as a critical temperature (CT) pin to indicate that the
55 critical temperature set point has been exceeded. Both pins can be set up with a
56 common hysteresis of 0°C - 15°C and a fault queue, ranging from 1 to 4 events.
57 Both pins can individually set to be active-low or active-high, while the whole
58 device can either run in comparator mode or interrupt mode. The ADT7410 supports
59 continuous temperature sampling, as well as sampling one temperature value per
64 package, a slightly narrower operating temperature range (-40°C to +150°C), and
72 -------------------
75 maximum and critical temperature, it can only be set for temp#_max_hyst.
78 The device is set to 16 bit resolution and comparator mode.
80 sysfs-Interface
81 ---------------
84 temp#_input		 temperature input
85 temp#_min		 temperature minimum setpoint
86 temp#_max		 temperature maximum setpoint
87 temp#_crit		 critical temperature setpoint
88 temp#_min_hyst		 hysteresis for temperature minimum (read-only)
89 temp#_max_hyst		 hysteresis for temperature maximum (read/write)
90 temp#_crit_hyst		 hysteresis for critical temperature (read-only)
91 temp#_min_alarm		 temperature minimum alarm flag
92 temp#_max_alarm		 temperature maximum alarm flag
93 temp#_crit_alarm	 critical temperature alarm flag