Lines Matching full:active
52 If 1, the GPIO is marked as active-low.
55 active-low or active-high, the "active_low" argument can be used here.
56 Setting it to 1 marks the GPIO as active-low.
83 | +-------------+ as high, assuming non-active |
86 | | High | as high, assuming active |
89 | +-------------+ as low, assuming non-active |
92 | | Low | as low, assuming active |
96 _DSD is present, both GPIOs will be treated as active with a high
118 Active High. Even for the cases when _DSD() is involved (see the example
119 above) the GPIO CS polarity must be defined Active High to avoid ambiguity.
190 line 0: "pin_0" unused input active-high
191 line 1: "pin_1" unused input active-high
192 line 2: unnamed unused input active-high
193 line 3: unnamed unused input active-high
194 line 4: "pin_3" unused input active-high
195 line 5: "pin_4_push_button" unused input active-high
196 line 6: unnamed unused input active-high
197 line 7 unnamed unused input active-high
198 line 8: unnamed unused input active-high
199 line 9: unnamed unused input active-high
200 line 10: unnamed unused input active-high
201 line 11: unnamed unused input active-high
202 line 12: unnamed unused input active-high
203 line 13: unnamed unused input active-high
204 line 14: unnamed unused input active-high
205 line 15: unnamed unused input active-high
245 line in that resource starting from zero, and the active-low flag for that line,