Lines Matching refs:Default
124 it always probe for memory. Default is to use whole detected
203 Default is `every` known device.
236 or panel. Default value is now read back from hardware - so you
243 Default setting is 100 for cards below G400 or G400 without DFP,
248 above for detailed explanation. Default is 640x480x8bpp if driver
258 xres:X horizontal resolution, in pixels. Default is derived from `vesa`
260 yres:X vertical resolution, in pixel lines. Default is derived from `vesa`
263 pixel line of picture. Default is derived from `vesa` option.
265 pulse. Default is derived from `vesa` option.
266 vslen:X length of VSYNC pulse, in lines. Default is derived from `vesa`
269 Default is derived from `vesa` option.
271 pulse. Default is derived from `vesa` option.
272 hslen:X length of HSYNC pulse, in pixels. Default is derived from `vesa`
274 pixclock:X dotclocks, in ps (picoseconds). Default is derived from `vesa`
281 Default depends on `vesa`.
282 depth:X Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
291 maxclk:X maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
294 in kHz or Hz. Default is `don't care`.
295 fv:X maximum vertical frequency. X must be specified in Hz. Default is