Lines Matching +full:0 +full:xca2

406        unload_when_empty=[0|1]
407        trydmi=[0|1] tryacpi=[0|1]
408        tryplatform=[0|1] trypci=[0|1]
438 and the start address is 0xca2, then the address for the second
439 register would be 0xca6.  This defaults to 1.
451 usually 0x20 and the driver defaults to that, but in case it's not, it
455 (if set to 0) the kernel IPMI daemon.  Normally this is auto-detected
462 default is one.  Setting to 0 is useful with the hotmod, but is
538 	tryacpi=[0|1] trydmi=[0|1]
559 usually 0x20 and the driver defaults to that, but in case it's not, it
581 	ipmi_ssif.tryacpi=[0|1] ipmi_ssif.trydmi=[0|1]
600 to the registered BMC on the system (default at IPMI address 0x20).
620 address.  So if you want your MC address to be 0x60, you put 0x30
631 channels being 0-7 and try the IPMB channels.
754 * Generator ID: 0x21 (kernel)
755 * EvM Rev: 0x03 (this event is formatting in IPMI 1.0 format)
756 * Sensor Type: 0x20 (OS critical stop sensor)
757 * Sensor #: The first byte of the panic string (0 if no panic string)
758 * Event Dir | Event Type: 0x6f (Assertion, sensor-specific event info)
759 * Event Data 1: 0xa1 (Runtime stop in OEM bytes 2 and 3)
769 * Record ID (bytes 0-1): Set by the SEL.
770 * Record type (byte 2): 0xf0 (OEM non-timestamped)