Lines Matching +full:board +full:- +full:related

1 .. SPDX-License-Identifier: GPL-2.0
11 everything hardware related (like how things are transmitted on the bus, how
17 https://resources.mipi.org/mipi-i3c-v1-download).
22 The I3C (pronounced 'eye-three-see') is a MIPI standardized protocol designed
25 while remaining power-efficient.
42 I3C is a multi-master protocol, so there might be several masters on a bus,
51 In addition to these per-device addresses, the protocol defines a broadcast
70 * BCR: Bus Characteristic Register. This 8-bit register describes the device bus
71   related capabilities
72 * DCR: Device Characteristic Register. This 8-bit register describes the
74 * Provisioned ID: A 48-bit unique identifier. On a given bus there should be no
95 I3C Hot-Join
98 The Hot-Join mechanism is similar to USB hotplug. This mechanism allows
104 * the device is hotplugged on the bus through an extension board
122 ----------------
125 related to bus management and all features that are common to a set of devices.
127 CCC commands contain an 8-bit CCC ID describing the command that is executed.
142 (0x61-0x7f and 0xe0-0xef).
145 -------------------------
158 ----------------
167 * HDR-DDR: Double Data Rate mode
168 * HDR-TSP: Ternary Symbol Pure. Only usable on busses with no I2C devices
169 * HDR-TSL: Ternary Symbol Legacy. Usable on busses with I2C devices
176 * one 16-bits command word in big endian
177 * N 16-bits data words in big endian
179 Those words may be wrapped with specific preambles/post-ambles which depend on
183 The 16-bits command word is made of:
189 * bit[0]: reserved/parity-bit
201 (both in terms of bus related limitations and functionalities), the software