Lines Matching refs:SPI

1 Davinci SPI controller device bindings
10 	address on the SPI bus. Should be set to 1.
13 	- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
14 	- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
15 	- "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
17 - reg: Offset and length of SPI controller register space
20 - ti,davinci-spi-intr-line: interrupt line used to connect the SPI
35 			and an args specifier containing the SPI device id
45 SPI slave nodes can contain the following properties.
46 Not all SPI Peripherals from Texas Instruments support this.
47 Please check SPI peripheral documentation for a device before using these.
50 	(SPIFMTn.WDELAY, SPIDAT1.WDEL) must be specified in number of SPI module
69 SPI controller device over the SPI bus.