Lines Matching +full:5 +full:mv

22     0, then VBST = VP. If greater than 0, the boost voltage will be 3300mV with
23     a value of 1 and will increase at a step size of 100mV until a maximum of
24     8000mV.
62     stage enters LDO operation. Starts as a default value of 50mV for a value
63     of 1 and increases with a step size of 50mV to a maximum of 750mV (value of
72     from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms.
80     The reference voltage starts at 3000mV with a value of 0x3 and is increased
81     by 100mV per step to a maximum of 5500mV.
91     1800mV with a step size of 50mV up to a maximum value of 1750mV.
92     Default is 1800mV.
109 	cirrus,boost-ctl = <0x30>;  /* VBST = 8000mV */