Lines Matching +full:1 +full:mv

22     0, then VBST = VP. If greater than 0, the boost voltage will be 3300mV with
23     a value of 1 and will increase at a step size of 100mV until a maximum of
24     8000mV.
31     20ms. If this property is set to 0,1,2,3 then ramp times would be 40ms,
54     LRCLK cycles. If this property is set to 0, 1, 2, or 3 then the memory
55     depths will be 1, 4, 8, 16 LRCLK cycles.  The default is 16 LRCLK cycles.
62     stage enters LDO operation. Starts as a default value of 50mV for a value
63     of 1 and increases with a step size of 50mV to a maximum of 750mV (value of
80     The reference voltage starts at 3000mV with a value of 0x3 and is increased
81     by 100mV per step to a maximum of 5500mV.
91     1800mV with a step size of 50mV up to a maximum value of 1750mV.
92     Default is 1800mV.
109 	cirrus,boost-ctl = <0x30>;  /* VBST = 8000mV */