Lines Matching +full:orientation +full:- +full:gpios

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
8   Type-C and other things.
11   - Bjorn Andersson <andersson@kernel.org>
15   platforms and implement USB Type-C handling and battery management. This
18   particularly the USB Type-C controllers relationship with USB and DisplayPort
24       - items:
25           - enum:
26               - qcom,qcm6490-pmic-glink
27               - qcom,sc8180x-pmic-glink
28               - qcom,sc8280xp-pmic-glink
29               - qcom,sm8350-pmic-glink
30               - qcom,sm8450-pmic-glink
31               - qcom,sm8550-pmic-glink
32           - const: qcom,pmic-glink
33       - items:
34           - enum:
35               - qcom,sm7325-pmic-glink
36           - const: qcom,qcm6490-pmic-glink
37           - const: qcom,pmic-glink
38       - items:
39           - enum:
40               - qcom,sm8650-pmic-glink
41               - qcom,x1e80100-pmic-glink
42           - const: qcom,sm8550-pmic-glink
43           - const: qcom,pmic-glink
45   '#address-cells':
48   '#size-cells':
51   orientation-gpios:
52     description: Array of input gpios for the Type-C connector orientation indication.
53       The GPIO indication is used to detect the orientation of the Type-C connector.
55       It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.
59     $ref: /schemas/connector/usb-connector.yaml#
61       - reg
64   - compatible
69   - |+
70     pmic-glink {
71         compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
73         #address-cells = <1>;
74         #size-cells = <0>;
77             compatible = "usb-c-connector";
79             power-role = "dual";
80             data-role = "dual";
83                 #address-cells = <1>;
84                 #size-cells = <0>;
89                         remote-endpoint = <&usb_role>;
96                         remote-endpoint = <&ss_phy_out>;
103                         remote-endpoint = <&sbu_mux>;