Lines Matching +full:jz4780 +full:- +full:dma

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Paul Cercueil <paul@crapouillou.net>
13   - $ref: serial.yaml#
17     pattern: "^serial@[0-9a-f]+$"
21       - enum:
22           - ingenic,jz4740-uart
23           - ingenic,jz4750-uart
24           - ingenic,jz4760-uart
25           - ingenic,jz4780-uart
26           - ingenic,x1000-uart
27       - items:
28           - enum:
29               - ingenic,jz4770-uart
30               - ingenic,jz4775-uart
31           - const: ingenic,jz4760-uart
32       - items:
33           - const: ingenic,jz4725b-uart
34           - const: ingenic,jz4740-uart
35       - items:
36           - const: ingenic,jz4755-uart
37           - const: ingenic,jz4750-uart
47       - description: Baud clock
48       - description: UART module clock
50   clock-names:
52       - const: baud
53       - const: module
57       - description: DMA controller phandle and request line for RX
58       - description: DMA controller phandle and request line for TX
60   dma-names:
62       - const: rx
63       - const: tx
66   - compatible
67   - reg
68   - interrupts
69   - clocks
70   - clock-names
71   - dmas
72   - dma-names
77   - |
78     #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
79     #include <dt-bindings/dma/jz4780-dma.h>
80     #include <dt-bindings/gpio/gpio.h>
82       compatible = "ingenic,jz4780-uart";
85       interrupt-parent = <&intc>;
89       clock-names = "baud", "module";
91       dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>,
92              <&dma JZ4780_DMA_UART2_TX 0xffffffff>;
93       dma-names = "rx", "tx";
96         compatible = "brcm,bcm4330-bt";
97         reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
98         vbat-supply = <&wlan0_power>;
99         device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
100         host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
101         shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;