Lines Matching full:r5f
4 $id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml#
7 title: TI K3 R5F processor subsystems
13 The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F
24 AM62 SoC family support a single R5F core only which runs Device Manager
27 Each Dual-Core R5F sub-system is represented as a single DTS node
29 the individual R5F cores. Each node has a number of required or optional
62 local R5F TCM address spaces to bus addresses.
70 Configuration Mode for the Dual R5F cores within the R5F cluster.
83 # R5F Processor Child Nodes:
87 "^r5f@[a-f0-9]+$":
90 The R5F Sub-System device node should define two R5F child nodes, each
91 node representing a TI instantiation of the Arm Cortex R5F core. There
95 the R5F Sub-System device node should only define one R5F child node
98 Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
103 either of them can be configured to appear at that R5F's address 0x0.
116 - ti,am62-r5f
117 - ti,am64-r5f
118 - ti,am654-r5f
119 - ti,j7200-r5f
120 - ti,j721e-r5f
121 - ti,j721s2-r5f
144 # The following properties are mandatory for R5F Core0 in both LockStep and Split
145 # modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for
146 # R5F Core1 in LockStep mode:
173 # The following properties are optional properties for each of the R5F cores:
179 R5F core configuration mode dictating if ATCM should be enabled. The
180 R5F address of ATCM is dictated by ti,loczrama property. Should be
188 R5F core configuration mode dictating if BTCM should be enabled. The
189 R5F address of BTCM is dictated by ti,loczrama property. Should be
197 R5F core configuration mode dictating which TCM should appear at
296 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
297 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
310 mcu_r5f0: r5f@41000000 {
311 compatible = "ti,am654-r5f";
329 mcu_r5f1: r5f@41400000 {
330 compatible = "ti,am654-r5f";