Lines Matching +full:pwm +full:- +full:enable
4 - compatible: Must be "ti,tps51632"
5 - reg: I2C slave address
8 - ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
9 - ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
10 will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
21 regulator-name = "tps51632-vout";
22 regulator-min-microvolt = <500000>;
23 regulator-max-microvolt = <1500000>;
24 regulator-boot-on;
25 ti,enable-pwm-dvfs;
26 ti,dvfs-step-20mV;