Lines Matching +full:vbus +full:- +full:boost +full:- +full:supply
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - ChiaEn Wu <chiaen_wu@richtek.com>
14 Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
18 const: mediatek,mt6370-charger
34 - description: irq of "USB is plugged in"
35 - description: irq of "BC1.2 is done"
36 - description: irq of "Minimum Input Voltage Regulation loop is active"
38 interrupt-names:
40 - const: uvp_d_evt
41 - const: attach_i
42 - const: mivr
44 io-channels:
46 Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
49 - description: |
50 VBUS voltage with lower accuracy (+-75mV) but higher measure
52 - description: |
53 VBUS voltage with higher accuracy (+-30mV) but lower measure
55 - description: the main system input voltage
56 - description: battery voltage
57 - description: battery temperature-sense input voltage
58 - description: IBUS current (required)
59 - description: battery current
60 - description: |
61 regulated output voltage to supply for the PWM low-side gate driver
63 - description: IC junction temperature
65 io-channel-names:
68 - const: vbusdiv5
69 - const: vbusdiv2
70 - const: vsys
71 - const: vbat
72 - const: ts_bat
73 - const: ibus
74 - const: ibat
75 - const: chg_vddp
76 - const: temp_jc
78 usb-otg-vbus-regulator:
80 description: OTG boost regulator.
85 enable-gpios:
89 - compatible
90 - interrupts
91 - interrupt-names
92 - io-channels