Lines Matching +full:usb +full:- +full:charger

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: MediaTek MT6370 Battery Charger
10   - ChiaEn Wu <chiaen_wu@richtek.com>
14   Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
18     const: mediatek,mt6370-charger
22       Specify what irqs are needed to be handled by MT6370 Charger driver.
23       We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
32       "MT6370_IRQ_CHG_MIVR" are required in this charger driver.
34       - description: irq of "USB is plugged in"
35       - description: irq of "BC1.2 is done"
36       - description: irq of "Minimum Input Voltage Regulation loop is active"
38   interrupt-names:
40       - const: uvp_d_evt
41       - const: attach_i
42       - const: mivr
44   io-channels:
49       - description: |
50           VBUS voltage with lower accuracy (+-75mV) but higher measure
52       - description: |
53           VBUS voltage with higher accuracy (+-30mV) but lower measure
55       - description: the main system input voltage
56       - description: battery voltage
57       - description: battery temperature-sense input voltage
58       - description: IBUS current (required)
59       - description: battery current
60       - description: |
61           regulated output voltage to supply for the PWM low-side gate driver
63       - description: IC junction temperature
65   io-channel-names:
68       - const: vbusdiv5
69       - const: vbusdiv2
70       - const: vsys
71       - const: vbat
72       - const: ts_bat
73       - const: ibus
74       - const: ibat
75       - const: chg_vddp
76       - const: temp_jc
78   usb-otg-vbus-regulator:
85       enable-gpios:
89   - compatible
90   - interrupts
91   - interrupt-names
92   - io-channels