Lines Matching +full:charge +full:- +full:current

1 # SPDX-License-Identifier: GPL-2.0
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Bq24250, bq24251 and bq24257 Li-Ion Charger
11   - Sebastian Reichel <sre@kernel.org>
14   - $ref: power-supply.yaml#
19       - ti,bq24250
20       - ti,bq24251
21       - ti,bq24257
29   ti,battery-regulation-voltage:
33   ti,charge-current:
35     description: maximum charging current in uA
37   ti,termination-current:
40       charge will be terminated when current in constant-voltage phase
43   pg-gpios:
48       state. If this pin is not specified a software-based approach for PG
52   ti,current-limit:
55       The maximum current to be drawn from the charger's input (in uA).
56       If this property is not specified, the input limit current is set
57       automatically using USB D+/D- signal based charger type detection.
58       If the hardware does not support the D+/D- based detection, a default
61   ti,ovp-voltage:
67   ti,in-dpm-voltage:
74   - compatible
75   - reg
76   - interrupts
77   - ti,battery-regulation-voltage
78   - ti,charge-current
79   - ti,termination-current
84   - |
85     #include <dt-bindings/gpio/gpio.h>
86     #include <dt-bindings/interrupt-controller/irq.h>
88       #address-cells = <1>;
89       #size-cells = <0>;
94         interrupt-parent = <&gpio1>;
97         pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
99         ti,battery-regulation-voltage = <4200000>;
100         ti,charge-current = <1000000>;
101         ti,termination-current = <50000>;
104   - |
105     #include <dt-bindings/gpio/gpio.h>
106     #include <dt-bindings/interrupt-controller/irq.h>
108       #address-cells = <1>;
109       #size-cells = <0>;
114         interrupt-parent = <&gpio1>;
117         ti,battery-regulation-voltage = <4200000>;
118         ti,charge-current = <500000>;
119         ti,termination-current = <50000>;
120         ti,current-limit = <900000>;
121         ti,ovp-voltage = <9500000>;
122         ti,in-dpm-voltage = <4440000>;