Lines Matching +full:output +full:- +full:impedance

1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/pincfg-node.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Linus Walleij <linus.walleij@linaro.org>
21   bias-disable:
25   bias-high-impedance:
27     description: high impedance mode ("third-state", "floating")
29   bias-bus-hold:
33   bias-pull-up:
35       - type: boolean
36       - $ref: /schemas/types.yaml#/definitions/uint32
40   bias-pull-down:
42       - type: boolean
43       - $ref: /schemas/types.yaml#/definitions/uint32
47   bias-pull-pin-default:
49       - type: boolean
50       - $ref: /schemas/types.yaml#/definitions/uint32
51     description: use pin-default pull state. Takes as optional argument on
54   drive-push-pull:
56       - type: boolean
57       - $ref: /schemas/types.yaml#/definitions/uint32
62   drive-open-drain:
64       - type: boolean
65       - $ref: /schemas/types.yaml#/definitions/uint32
70   drive-open-source:
74   drive-strength:
78   drive-strength-microamp:
81   input-enable:
83     description: enable input on pin (no effect on output, such as
86   input-disable:
88     description: disable input on pin (no effect on output, such as
91   input-schmitt-enable:
93     description: enable schmitt-trigger mode
95   input-schmitt-disable:
97     description: disable schmitt-trigger mode
99   input-schmitt-microvolt:
100     description: threshold strength for schmitt-trigger
102   input-debounce:
103     $ref: /schemas/types.yaml#/definitions/uint32-array
107   power-source:
111   low-power-enable:
115   low-power-disable:
119   output-disable:
121     description: disable output on a pin (such as disable an output buffer)
123   output-enable:
125     description: enable output on a pin without actively driving it
126       (such as enabling an output buffer)
128   output-impedance-ohms:
129     description: set the output impedance of a pin to at most X ohms
131   output-low:
133     description: set the pin to output mode with low level
135   output-high:
137     description: set the pin to output mode with high level
139   sleep-hardware-state:
144   slew-rate:
148   skew-delay:
152       and the delay before latching a value to an output
153       pin. Typically indicates how many double-inverters are